Brother NC-7100W User Manual

Page 85

6 - 21 NOVELL

NETWARE

PRINTING

Select the Brother print server from the list of print servers.
When you get the message that the print server is connected,
press the ENTER key and type the default password

access

in response to the

prompt (the password will not echo) and

then press the ENTER key again in response to the

Enter

Username>

prompt. When you get the

Local>

prompt, type:

SET NETWARE NPRINTER nlm number ON service
SET NETWARE RESCAN
EXIT

■

Where

nlm

is the name of the PSERVER NLM on your file

server.

■

Number

is the printer number (this must match the printer

number you selected during the PCONSOLE configuration
in the previous steps).

■

Service

is the name of the service assigned by NetWare

print server name (where the default services are

BRN_xxxxxx_P1

for the Brother printer, where

xxxxxx

the last six digits of the Ethernet address (MAC address)).

For example, to set up remote "Printer 3" for a Brother printer with
the print server BRN_310107_P1 using the PSERVER NLM called
BROTHER1PS, you would type:

SET NETWARE NPRINTER BROTHER1PS 3 ON BRN_310107_P1
SET NETWARE RESCAN
EXIT

■

You can also enter the remote printer name using your web
browser, by connecting to the Brother print server using the TCP/
IP protocol and selecting the NetWare

protocol configuration.

The same services assigned by NetWare

print server name

cannot be used for both queue server mode and remote
printer mode.

You must now unload the PSERVER NLM from your
NetWare

file server console and then reload it in order for

the changes to take effect.