Brother NC-7100W User Manual

Page 79

6 - 15 NOVELL

NETWARE

PRINTING

You will be shown a list of current print servers. Press the
INSERT key to create a new entry, type in the NetWare

server name (

BRN_xxxxxx_P1

by default, where

xxxxxx

is the

last six digits of the Ethernet address) and press ENTER.
Return to the main Available Options menu by pressing
ESCAPE.

Select the Print Queue Information (NetWare

3.xx) or Print

Queues (NetWare

4.1x) menu option to see list of configured

print queues.

Press INSERT to create a new queue on the file server, type the
new queue name and press ENTER. The name does not have
to be related to the name of the print server resources, but
should be short and convenient for users to remember.

Make sure that the new queue name is highlighted, and then
press ENTER to configure the queue.

Select Queue Servers (in NetWare

4.1x, this item is called

print servers) and press ENTER to specify which network print
servers can print jobs from this print queue. The list will be
empty, since none have been selected yet if this is a new queue.

Press INSERT to get a list of the queue server candidates and
select the print server service name from step 9, Press ENTER.

Press ESCAPE several times until you return to the Available
Options menu.

Force the print server to rescan file servers for print jobs. You may
either turn the printer off and on again or you may use the
BRCONFIG or TELNET command

SET NETWARE RESCAN

to make

the print server rescan for file servers.

Configuring the Brother Print Server (Queue
Server Mode in NDS Mode) Using PCONSOLE and
BRCONFIG

Make sure that you are logged in as

ADMIN

in NDS mode on the

NetWare

4.1x file server.

Run the PCONSOLE utility from PC workstation.