Brother NC-7100W - Manual (Page 70)

NOVELL ® NETWARE ® PRINTING 6 - 6
5 Select None for the printer Type, and Novell Port Handler for
the Port Handler Type. Then click OK.
6 You must now specify the type of connection that you are going
to use. There are four possible options. Select the LPR over IP
option.
7 Enter the relevant details of the printer and Brother
recommends typing
Binary_P1 for the printer name. Click
finish and wait. Select the printer drivers for the client operating
systems.
You are now ready to print.
Configuring NetWare ® 3 and NetWare ® 4 Systems
Brother's BRAdmin application provides similar functionality to the
NetWare
® PCONSOLE utility (or the NWADMIN utility in NetWare ®
4.1x or later). To use the BRAdmin application to configure a Brother
print server under NetWare
® , make sure that you are logged in as
SUPERVISOR (NetWare ® 2.xx or 3.xx) or ADMIN (NetWare ® 4.1x or
later) and perform the appropriate steps as detailed in the following
pages.
Creating the NetWare
®
Print Server (Bindery Queue
Server) Using BRAdmin Professional Utility
1 Make sure that you logged in as SUPERVISOR (NetWare ® 2.xx
or 3.xx) or ADMIN (NetWare ® 4.xx or later).
2 Start BRAdmin.
You must install the Novell ® NetWare ® Client 32 if you wish
to create queue information on your NetWare ® servers by
BRAdmin.