Brother MFC-8950DWT - Manual (Page 72)

65
Control panel setup
4
Function table and default factory settings
4
DCP-8110DN, DCP-8150DN, DCP-8155DN, MFC-8510DN and MFC-8520DN
4
The factory settings are shown in Bold with an asterisk.
Note
(For MFC-8510DN and MFC-8520DN)
• LDAP, Internet Fax, Fax to Server and Scan to E-mail Server functions are available as a download.
• In order to use this function, please download the necessary firmware from the “Downloads” page for your
model on the Brother Solutions Center at http://solutions.brother.com/.
Main menu Submenu Menu selections Options
5.Network
(DCP-8110DN,
DCP-8150DN
and
DCP-8155DN)
7.Network
(MFC-8510DN
and
MFC-8520DN)
1.TCP/IP 1.Boot Method Auto
*
Static
RARP
BOOTP
DHCP
(If you choose Auto, RARP, BOOTP or DHCP, you will be asked
to enter how many times the machine tries to obtain the IP
address.)
2.IP Address [000-255].[000-255].[000-255].[000-255]
[000].[000].[000].[000]
*
1
3.Subnet Mask [000-255].[000-255].[000-255].[000-255]
[000].[000].[000].[000]
* 1
4.Gateway [000-255].[000-255].[000-255].[000-255]
[000].[000].[000].[000]
*
5.Node Name BRNxxxxxxxxxxxx
(up to 32 characters)
6.WINS Config Auto
*
Static
7.WINS Server Primary [000-255].[000-255].[000-255].[000-255]
[000].[000].[000].[000]
*
Secondary [000-255].[000-255].[000-255].[000-255]
[000].[000].[000].[000]
*