Brother MFC-8950DWT - Manual (Page 64)

57
Control panel setup
4
Size Limit
Some E-mail servers do not allow you to send large E-mail documents (the system administrator will often
place a limit on the maximum E-mail size). With this function enabled, the machine will display
Out of Memory
when trying to send E-mail documents over 1 Mbyte in size. The document will not be sent
and an error report will be printed. The document you are sending should be separated into smaller
documents that will be accepted by the mail server. (For your information, a 42 page document based on the
ITU-T Test Chart #1 test chart is approximately 1 Mbyte in size.)
4
Notification
The notification feature allows a confirmation of receipt message to be transmitted to the sending station
when the Internet Fax has been received.
This feature only works on Internet Fax machines that support the “MDN” specification.
Setup Relay
(For MFC-8510DN, MFC-8520DN, MFC-8710DW, MFC-8810DW, MFC-8910DW and
MFC-8950DW(T))
4
Relay Broadcast
This function allows the machine to receive a document over the Internet, and then relay it to other fax
machines through conventional analog landlines.
4
Relay Domain
You can register the Domain Names (Max. 10) that are allowed to request a Relay Broadcast.
4
Relay Report
A Relay Broadcast Report can be printed at the machine that will act as a Relay Station for all Relay
Broadcasts.
Its primary function is to print reports of any relayed broadcasts that have been sent through the machine.
Please note: In order to use this function, you must assign the relay domain in the “Trusted Domains” section
of the Relay function settings.
Note
For more information on Relay Broadcast, see Relay broadcasting uu page 117.