Brother MFC-8950DWT - Manual (Page 101)

94
Web Based Management
5
How to configure the Gigabit Ethernet and Jumbo Frame settings using Web
Based Management (web browser)
5
a Click Network on the machine’s web page and choose Wired.
b
Click Ethernet.
c
Choose Auto from Ethernet Mode.
d
Choose Enabled for Jumbo Frame. (The default setting is Disabled.)
e
Enter your frame size in the Frame Size field. (The default setting is 1,518 byte.)
Note
• You must set the frame size correctly.
• Make sure all the devices on your network have been configured to an appropriate frame size. If you are
not sure about the frame size, contact your network administrator.
f
Click Submit.
To enable the settings, you need to restart your machine.
Note
You can confirm your settings by printing the Network Configuration Report. See Printing the Network
Configuration Report uu page 63.