Brother MFC-8950DWT - Manual (Page 115)

108
Web Based Management
5
d
Make sure the machine is turned on and then choose Advanced Setting on the Protocol page.
Now you can configure and change the following LDAP settings using a web browser.
 Status
 LDAP Server Address
 Port (The default port number is 389.)
 Search Root
 Authentication
 Username
1
 Password
1
 Kerberos Server Address
1
 SNTP
 Timeout for LDAP
 Attribute of Name (Search Key)
 Attribute of E-mail
 Attribute of Fax Number
1 This selection will only be available depending on the authentication method used.
e
After setting, click Submit. Make sure that the Status is OK on the Test Result page.
Note
• If the LDAP server supports Kerberos Authentication, we recommend to choose Kerberos for the
Authentication setting. It provides strong authentication between the LDAP server and your machine.
You must configure the SNTP protocol (network time server), or you must set the date, time and time zone
correctly on the control panel for Kerberos Authentication. (For information about setting SNTP, see
Synchronize with SNTP server uu page 98. For information about setting the date, time and time zone:
uu
Quick Setup Guide.)
• For the details of each item, see the Help Text in the Web Based Management.