Brother MFC-8950DWT - Manual (Page 112)

105
Web Based Management
5
d
Click Scan to FTP/Network Profile on Scan page.
Now you can configure and change the following Scan to FTP settings using a web browser.
 Profile Name (Up to 15 characters)
 Host Address (FTP server address)
 Username
 Password
 Store Directory
 File Name
 Quality
 File Type
 Glass Scan Size
1
 File Size
 Passive Mode
 Port Number
1 For DCP-8250DN and MFC-8950DW(T)
You can set Passive Mode to Off or On depending on your FTP server and network firewall
configuration. By default this setting is On, you can also change the port number used to access the FTP
server. The default for this setting is port 21. In most cases these two settings can remain set as default.
Note
Scan to FTP is available when FTP server profiles are configured using Web Based Management.