FUTEK IPM52x (D520) Digital Display - Manual (Page 6)

5
SECTION 2.0 SAFETY SUMMARY
All safety related regulations, local codes and in structions that appear
this literature or on equipment must be observed to ensure personal safety and
preve
so can be potentially harmful to
ersons
he ded. Ground connection is tied to the Main
oard “P1” connector pin # C.
rmed with power disconnected. Use only the
me type fuse. The fuse must be a TR5 microfuse, Time Lag (T), 1 amp,
IN OUTS AND WIRING DIAGRAMS
in
to
nt damage to either the instrument or equipment connected to it. If
equipment is used in a manner not specified by the manufacture, the protection
provided by the equipment may be impaired.
Do not use this unit directly command motors, valves, or other
actuators not equipped with safeguards. To do
p
or equipment in the event of a fault to the unit.
unit must be properly groun
rior to installation
And operation of the unit.
T
B
Fuse replacement must be perfo
sa
250VAC. Fuse location shown in section 1.3
P
CAUTION: Read complete CAUTION: Risk of Electric shock
Instructions p