FUTEK IPM52x (D520) Digital Display - Manual (Page 4)

3
SECTION 1
INTRODUCTION AND DESCRIPTION
SECTION 1.1: UNIT DESCRIPTION:
The single input IPM525 intelligent process meters features 5 ½
digit resolution, 6 digit display, 5 front key operation and a NEMA 4X,
industrialized aluminum case. One Form A relay is provided standard for
use as an Alarm output. The IPM525 emphasizes the features required in
today’s applications, especially scaling of the meter to display in
engineering units. Two methods are provided to scale the meter: No
calculation scale and offset, and load calibration.
Models:
IPM525 – 4 analog inputs with 5 th channel math
Features:
"C" 3 Form C Relays
"H" 4 Individual Analog Outputs & Excitation Output
"P" Excitation Supplies 10VDC and 24VDC
"T" Serial RS-232C Communication
“U” RS485 Communication (available soon)
"F" Factory Scaling (optional)
Inputs:
Process inputs selectable for 20mA, 30mV, 100mV,
200mV, 2V, +10V input
The setup of the meter is fully programmed through the front panel
keypads. The 115VAC or 220VAC selection is accomplished through the
selection of an internal jumper connection.
SECTION 1.2: DIMENSIONAL DRAWINGS