FUTEK IPM52x (D520) Digital Display - Manual (Page 15)

14
•
•
•
•
If EXIT key is push at any of the 6
main heading, exit back to run mode.
If EXIT key is push while in a main
branch, exit back to that main branches
heading.
If SELECT key is push while at main
branch heading, advance to next main
branch.
When “skip code number” is entered by
ENTER key, advance to next branch
heading.
F. F1, F2, F3 and F4 keys
The RUN mode keys(F1-F4) functions are selected
in the SETUP mode under the Main program branch
heading SPEC. The function are described under
the SPECIALS FEATURES PROGRAMMING
BRANCH section of the manual (See pg. 26). The
following are the available selections.
• "Alarm 1" through "Alarm 4"
• "TARE 1","TARE 2", "TARE 3", “TARE
4”
• "RESET"
• "CHANNEL 1, 2, 3, 4, or 5"
• "PEAK 1"
• "PEAK 2"
• "SCALE2"
• "NET"
• "HOLD” (Scan Mode)