Thermo Fisher Scientific EcoScan DO 6 - Manual (Page 66)

Instruction Manual DO 6
58
11 FACTORY DEFAULT SETTINGS
Setting
Menu
FUNCTION PARAMETER
OPTING KEYS
PARAMETER
OPTIONS
DEFAULT
SETTING
COF.1 Unit Configuration Parameter Title
Only
Parameter
Title Only
A.ATC Selection of Automatic or
Manual Temperature
Compensation ▲ and ▼ YES; NO YES
b.DO Selection of mg/L or ppm of
the concentration mode ▲ and ▼ mg/L or ppm mg/L
CAL.2 Viewing the latest
calibration data Viewing Only Viewing Only _ _ _ _
ELE.3 Viewing the Electrode
properties Parameter Title
Only Parameter
Title Only
FACT Viewing the Slope Factor Viewing Only Viewing Only 1.000
OFS Viewing the % Saturation
offset adjustment. Viewing Only Viewing Only 0.0%
HI.mV Viewing the mV value for
100% Saturation Viewing Only Viewing Only 50 mV
LO.mV Viewing the mV value for
0% Saturation Viewing Only Viewing Only
0 mV
AtO.4 Selection of automatic
power off
▲ and ▼ YES; NO YES
rSt.5 Reset to factory defaults Parameter Title
Only Parameter
Title Only
A.CAL Selection of Calibration
Reset ▲ and ▼ NO, YES NO
b.USR Selection of User Reset ▲ and ▼ NO, YES NO
OFS.6 Offset Adjustment
(% Saturation)
▲ and ▼ +/- 10.0 of
measured
reading 0.0%