Thermo Fisher Scientific EcoScan DO 6 - Manual (Page 44)

Instruction Manual DO 6
36
7.2 (COF.1) Configuration
Menu
In this menu, the meter lets you configure the
selection of automatic temperature
compensation (A) and the selection of mg/L
or ppm mode for the mg/L (ppm)
Concentration measurement mode. (Second
feature is only available in mg/L (ppm)
Concentration Set Up menu)
7.2.1 Selection of Automatic
Temperature Compensation
From “COF.1” of any Set Up menu,
1) Press the HOLD/ENTER key for the
display to show the Automatic
Temperature Compensation selection
menu “A.ATC”.
2) Press the HOLD/ENTER key to enter
the ATC selection menu.
3) Use the ▲ and ▼ keys to either activate
or deactivate the ATC feature.
a. YES – activates the ATC
b. NO – deactivates the ATC and
activates the Manual temperature
compensation
4) Press the HOLD/ENTER key to confirm
your selection.
HOLD
ENTER
HOLD
ENTER
Figure 20: Selection of Automatic or
Manual Temperature
Compensation