beautypg.com

Thermo Fisher Scientific EcoScan DO 6 User Manual

Page 53

background image

Instruction Manual

DO 6

45

b. NO – deactivates Calibration Reset

5) Press HOLD/ENTER key to confirm the selection made.

6) If selection is ‘YES’, meter would immediately return to measurement

mode. Otherwise it will return to the main group menu. Press CAL to return
to the measurement mode.

Note: When you reset your meter from % Saturation Set Up menu, both %
Saturation and mg/L (ppm) Concentration calibrations are reset to factory
default. However, calibration reset in the mg/L (ppm) Concentration Set Up
menu will only reset the calibration in the concentration mode and do not affect
the calibration in the percentage saturation mode.