Thermo Fisher Scientific EcoScan DO 6 - Manual (Page 40)

Instruction Manual DO 6
32
SEt.P – Enter Set Up Menu
COF.1 – Enter Configuration Menu
A.ATC – Selection for automatic temperature compensation.
b.DO – Selection of mg/L or ppm of the concentration mode
measurement. (Only available in Concentration Set
Up menu)
CAL.2 – Viewing the latest Calibration data
‘View only’ parameter for the latest calibration data
of the DO % Saturation calibration and the DO
mg/L (ppm) Concentration calibration. Calibration
data will be viewed according to its respective Set
Up menu.
ELE.3 – Viewing the Electrode properties
FACT – Viewing the Slope Factor
OFS – Viewing the % Saturation offset adjustment. (Only
available in % Saturation Set Up menu)
HI.mV – Viewing the mV value for 100% Saturation
LO.mV – Viewing the mV value for 0% Saturation
AtO.4 – Selection of automatic power off (20 minutes from
the last key press)
rSt.5 – Enter Reset Menu
A.CAL – Selection of Calibration Reset (Clear only
Calibration and its Data back to factory default
condition)
b.USR – Selection of User Reset (Clear all user setting back
to factory default condition)