Thermo Fisher Scientific EcoScan DO 6 - Manual (Page 35)

Instruction Manual DO 6
27
7) Use the ▲ and ▼ keys to set the pressure value and press the
HOLD/ENTER to confirm the setting. A confirmation indicator “CO” will be
displayed for 1.5 seconds before the meter shows the next display of
Salinity setting “b.SAL”. If the Set Up menu is derived from other than the
mg/L (ppm) Concentration mode, the meter will return to the Set Up main
group menu “DPr.7”.
8) Press CAL key to return to measurement mode, or continue to make a
salinity setting adjustment.