SHIMPO DEG-2000 - Manual (Page 9)

7
◯ 12
RS232C connector
A serial communication connector for connecting a personal computer or printer.
◯ 13
Switch input connector
A connector for entering a measure or mastering command with an external button. It is
also used for RS422 communication and Digimatic output.
◯ 14
Analog input/output connector
A connector for external analog signal input and amplifier signal output.
◯ 15
DC input/output connector
A judgment result input/output connector for connecting LEDs, sequencers, etc.
◯ 16
DC input/output connector (option)
◯ 17
Power switch
Used to turn on and off the power of the instrument.
◯ 18
Power connector
Used to input AC power. It can be used in the range of 85 to 264 VAC, but the
accessory power cable must be used in the range of 85 to 125 VAC.
Rear of DEG2000
AC85～264V
EXT
I/O
ANALOG
SW.ETC
RS232C
A B
C
D
◯ 12
◯
13
◯ 14
◯
15
◯
16
◯
17
◯
18