SHIMPO DEG-2000 - Manual (Page 7)

5
- NG - OK OK +OK +NG
ENT
RST
PROG
SET MAS
SET MAS
◯ 6
Left arrow /SET key
Mode Keying Operation
Measure Press 2 sec. Mode is changed to set mode.
Set Press once. Set description is changed.
Adjust detector Press once. Measuring head is changed.
◯ 7
Right arrow/MAS key
Mode Keying Operation
Measure Press 2 sec. Mode is changed to master mode.
Set Press once. Set description is changed.
Master Press once. Mode is changed to adjust detector mode.
Adjust detector Press once. Measuring head is changed.
◯ 8
Down arrow/PROG key
Mode Keying Operation
Measure Press 2 sec. Mode is changed to change program mode.
Measure Press once. Item is changed from ITEM 3 to ITEM 1.
Set Press once. Set value is entered (or decremented).
Master Press once. Master is changed from MAS 2 to MAS 1.
Adjust detector Press once. Master is changed from MAS 2 to MAS 1, or set
value is entered (or decremented).
Change program Press once. Program is changed from PROG 4 to PROG 1.
◯
9
Up arrow key
Mode Keying Operation
Measure Press once. Item is changed from ITEM 1 to ITEM 3.
Set Press once. Set value is entered (or incremented).
Master Press once. Master is changed from MAS 1 to MAS 2.
Adjust detector Press once. Master is changed from MAS 1 to MAS 2, or set
value is entered (or incremented).
Change program Press once. Program is changed from PROG 1 to PROG 4.
➅ ➆
➇ ➈