KYORITSU 5020 Instruction Manual User Manual
Page 51
̶
48
̶
7. When the logger is connected to the PC using the USB cable, the
logger connected is not detected in the logger list.
Check if the USB cable is connected correctly.
Check if the USB driver is installed.
Check if the USB driver is failed to be installed on the PC.
If the installation is failed, firstly delete the USB driver installed and
re-install it according to the procedure stated in the USB Notice sheet
or Install Manual.
8. When installing the USB driver with the hardware Windows XP, the
following remark appears.
"The software you are installing for this hardware:
KEW LOGGER 5010/5020 has not passed Windows Logo testing to
verify its compatibility with Windows XP."
Click "Continue Anyway" to continue the installation.
As operation check was done, no problem shall happen.
(Windows is a registered trademark of Microsoft of the United Sates.)