KYORITSU 5020 Instruction Manual - Manual (Page 38)

̶ 35 ̶
Setting procedure
1. Power on the instrument, and press the
button.
2. Press the button when "SEt.1" is displayed
on the LCD.
3. Press the button when "SEt.2" is displayed
on the LCD.
4. "Location information":
Location No. is displayed on the LCD.
Can be selected between "P.000" and "P.999".
◆ Press the
button and proceed to the
next step (Auto-power-off) when not changing
the setting.
◆ To change the setting, press the
button.
Then the indication on the LCD flashes. Press
the or button to set the value
to the desired one. Then press the
button to confirm it.
Point
● Preset Location No. is saved with a recorded
data (1 Memory Block). When performing
▼
▼
▼