KYORITSU 5020 Instruction Manual - Manual (Page 40)

̶ 37 ̶
6. "Time": Time is displayed.
Can be adjusted between "00:00" and "23:59".
◆ Press the button and proceed to the
next step (Timer) when not changing the setting.
◆ To change the setting, press the button.
Then the indication on the LCD flashes.
Press the or button to set the
value to the desired one. Then press the
button to confirm it.
Point
Connect the instrument to PC and set time and
date via PC software : "KEW LOG Soft 2".
7. "Timer": State of Timer function is displayed.
Can be set between "00:00" and "23:59".
◆ Press the button and proceed to the
next step (Memory Clear) when not changing the
setting.
◆ To change the setting, press the button.
Then the indication on the LCD flashes.
Press the or button to set
the value to the desired one. Then press the
button to confirm it.
Point
Press the button at least 1 sec.
after setting Timer. Then the instrument goes into
stand-by mode for recording.
Recording starts at the preset time.
▼
▼