KROHNE OPTISYS SLM 2100 EN - Manual (Page 58)

5
OPERATION
58
OPTISYS SLM 2100
www.krohne.com 03/2014 - 4002737302 - MA OPTISYS SLM 2100 R02 en
5.7.10 Passwords
You can activate passwords for different menu levels:
Password levels
Common usage
• Protection of the menus "Test" and "Setup" with a password, free access to the menu "Quick
setup". You can achieve this by activating a setup password only.
• Protection of the quick setup with a known password and confidential setup password to
protect the quick setup against arbitrary use and the setup and test menus against misuse.
This is done by activating a password for the menus "setup" and "quick setup".
5.7.11 Timeout function
Menu mode
If the user does not press any key in a 5 minutes time frame and the device is not in the test
mode, it automatically returns to the measuring mode (i.e. the display shows one or more
measuring results).
Menu Required password Point of query Preview of setting
possible
Quick setup For quick setup At entry to the
parameter edit mode
Yes
Test For setup
Setup For setup
Service For service At entry to the service
menu
No
INFORMATION!
If you activate a password for the menu "Quick setup" only and not for the menu "Setup", the
menus "Setup" and "Test" will also be protected by the quick setup password.
INFORMATION!
Independent of the mode (menu mode or test mode, see below), all changes done until an
automatic return are lost if this return happens!
.book Page 58 Wednesday, April 30, 2014 1:39 PM