GW Instek GDS-1000 Series Programming Manual - Manual (Page 9)

COMMAND DETAILS
17
Data size
Indicates the data size. The data size is always 8008
(4000 points per channel).
Time interval
Indicates the time interval between two adjacent
sampling points in the floating point format,
compatible with IEEE 754 standards.
Note: The data is sorted in the little-endian format.
Channel indicator
Indicates the channel, 1 or 2.
Reserved data
An unused data block, 3 bytes.
Waveform data
The waveform data comprised of 8000 data points.
Each point is made up of 2 bytes (16 bits), high
byte (MSD) first.
GDS-1000 Programming Manual
18
7B
Autoset Command
23B
:AUToset Set
Description Runs the Autoset function to automatically
configure the horizontal scale, vertical scale, and
trigger according to the input signal.
Same as: Auto Set key
Syntax < Long > < Short >
:autoset :aut