GW Instek GDS-1000 Series Programming Manual - Manual (Page 21)

COMMAND DETAILS
41
1 ~ 15 W1 ~ W15
Reference waveform
1, 2 RefA, RefB
Example :memory1:recall:waveform 1 Recalls a waveform
from the internal
memory W1 and saves
it to the reference
waveform A
64B
:MEMory:SAVe:SETup Set
Description Saves the current panel settings to an internal
memory.
Same as: Save/Recall key (save) → F1
Syntax < Long > < Short >
:memory:save:setup :mem:sav:set
Parameter Internal memory
1 ~ 15 S1 ~ S15
Example :memory1:save:setup Save the current panel
settings to the memory S1
65B
:MEMory:SAVe:WAVeform Set
Description Saves a reference waveform to the internal
memory.
Same as: Save/Recall key (save) → F2
Syntax < Long > < Short >
:memory:save:waveform :mem:sav:wav
Parameter Internal memory
1 ~ 15 W1 ~ W15
Reference waveform
GDS-1000 Programming Manual
42
0 CH1 1 CH2
2 Math 3 RefA
4 RefB
Example :memory1:save:waveform 1 Saves the reference
waveform A to the
internal memory W1
66B
*RCL Set
Description Recalls a set of panel setting from one of the fifteen
internal memories, S1 to S15.
Same as: Save/Recall key (recall) → F3
Syntax *rcl
Parameter Settings
1 to 15 S1 to S15
Example *rcl 1 Recalls the panel settings
from S1
67B
:REF:DISPlay
Set
Query
Description Recalls a reference waveform into the display or
returns its status.
Same as: Save/Recall key (recall) → F5 → F2 or F3
Syntax < Long > < Short >
:ref:display
:ref:display?
:refdisp
:refdisp?
Parameter Reference Reference on/off
1 A 0 off
2 B 1 on