GW Instek GDS-1000 Series Programming Manual User Manual
Digital storage oscilloscope
Digital Storage Oscilloscope
GDS-1000 Series
PROGRAMMING MANUAL
GW INSTEK PART NO.
ISO-9001 CERTIFIED MANUFACTURER
October 2007 edition
This manual contains proprietary information which is protected by
copyright. All rights are reserved. No part of this manual may be
photocopied, reproduced or translated to another language without
prior written consent of Good Will Corporation.
The information in this manual was correct at the time of printing.
However, Good Will continues to improve products and reserves the
right to change specifications, equipment, and maintenance
procedures at any time without notice.
Windows is a registered trademark of Microsoft Corporation in the United States and other countries.
Good Will Instrument Co., Ltd.
No. 7-1, Jhongsing Rd., Tucheng City, Taipei County 236, Taiwan.
Document Outline
- Rear Panel Overview
- Configuring the USB Interface
- Command Syntax
- List of Command in Functional Order
- List of Command in Alphabetical Order
- System command
- Acquisition Command
- Autoset Command
- Channel / Math Command
- Cursor Command
- Display Command
- Measure command
- Save/Recall Command
- Time (Horizontal) command
- Trigger command