GW Instek GDS-1000 Series Programming Manual - Manual (Page 11)

COMMAND DETAILS
21
:channel:invert
:channel:invert?
:chan:inv
:chan:inv?
Parameter Channel Channel invert
1/2 CH1/2 0 off
1 on
Example :channel1:invert 1 Inverts Channel 1
28B
:CHANnel:MATH
Set
Query
Description Selects or returns the math operation type.
Same as: Math key → F1
Syntax < Long > < Short >
:channel:math
:channel:math?
:chan:math
:chan:math?
Parameter Channel Math operation
1/2 CH1 or CH2 0 Math off
1 Add
2 Subtract
3 FFT
Example1 :channel1:math 2 Channel 1 – Channel 2
Example2 :channel2:math 2 Channel 1 – Channel 2
Example3 :channel2:math 2 Runs FFT on Channel 2
29B
:CHANnel:OFFSet
Set
Query
Description Sets or returns the offset level for a channel. The
offset level range depends on the vertical scale.
GDS-1000 Programming Manual
22
Syntax < Long > < Short >
:channel:offset
:channel:offset?
:chan:offs
:chan:offs?
Parameter Channel Offset level
1/2 CH1/2 ±0.5 –0.5V ~ +0.5V
(2mV/div~50mV/div)
±5.0 –5.0V ~ +5.0V
(100mV/div~500mV/div)
±50.0 –50.0V ~ +50.0V
(1V/div ~ 5V/div)
Example :channel1:scale 1.00e–2
:channel1:offset 2.00e–2
Sets the Channel 1
scale to 10mV/div
Sets the Channel 1
offset to 20mV
30B
:CHANnel:PROBe
Set
Query
Description Sets or returns the probe attenuation factor.
Same as: Channel key → F4
Syntax < Long > < Short >
:channel:probe
:channel:probe?
:chan:prob
:chan:prob?
Parameter Channel Probe attenuation factor
1/2 CH1/2 0 1x
1 10x
2 100x
Example :channel1:probe 1 Sets the Channel 1
probe attenuation
factor to 10x