GW Instek GDS-1000 Series Programming Manual - Manual (Page 22)

COMMAND DETAILS
43
Example :ref1:display 1 Turns on the reference
waveform A
68B
:REF:LOCate
Set
Query
Description Moves or returns the position of a reference
waveform.
Same as: Save/Recall key → F5 → Variable knob
Syntax < Long > < Short >
:ref:locate
:ref:locate?
:ref:loc
:ref:loc?
Parameter Reference Position
1 A –100 to +100
2 B
Note Before using this command, turn on a reference
waveform. See the example below.
Example :ref1:display 1
:ref1:locate 0
Turns on the reference
waveform A and move
it to ±0 position
69B
:REF:SAVe Set
Description Saves an input signal as a reference waveform.
Same as: Save/Recall key (save) → F2 → F2 → F3
Syntax < Long > < Short >
:ref:save :refsav
Parameter Reference Source
1 A 1 Channel 1
2 B 2 Channel 2
3 Math
GDS-1000 Programming Manual
44
Example :ref1:save 1 Saves the Channel 1
signal as the reference
waveform A
70B
*SAV Set
Description Saves the current panel settings into the internal
memory.
Same as: Save/Recall key
→ F1
Syntax *sav
Parameter Internal memory
1 to 15 S1 to S15
Example *sav 1 Saves the current panel
settings into S1