GW Instek GDS-1000 Series Programming Manual - Manual (Page 15)

COMMAND DETAILS
29
Parameter Display contrast
–10 ~ 10 Lowest (–10) to the Highest (+10)
Example :display:contrast 0 Sets the display
contrast to the middle
(±0)
39B
:DISPlay:GRATicule
Set
Query
Description Sets or returns the display grid type.
Same as: Display key → F5
Syntax < Long > < Short >
:display:graticule
:display:graticule?
:disp:grat
:disp:grat?
Parameter Grid type Grid type
0 Full mode 2 Frame mode
1 Cross mode
Example :display:graticule 0 Selects the full grid
40B
:DISPlay:WAVeform
Set
Query
Description Sets or returns the display waveform type.
Same as: Display key → F1
Syntax < Long > < Short >
:display:waveform
:display:waveform?
:disp:wav
:disp:wav?
Parameter Display waveform type
0 Vectors
1 Dots
GDS-1000 Programming Manual
30
Example :display:waveform 0 Selects the vectors
waveform
41B
:REFResh Set
Description Erases the existing waveform and draws a new
one.
Same as: Display key → F3
Syntax < Long > < Short >
:refresh :refr