GW Instek GPD-4303S - Manual (Page 7)

SAFETY INSTRUCTIONS
Fuse
WARNING
• Fuse type: 100V/120V: T6.3A/250V,
220V/230V: T3.15A/250V
• Make sure the correct type of fuse is installed
before power up.
• To ensure fire protection, replace the fuse only
with the specified type and rating.
• Disconnect the power cord before fuse
replacement.
• Make sure the cause of fuse blowout is fixed
before fuse replacement.
Cleaning the
GPD-X303S
series • Disconnect the power cord before cleaning.
• Use a soft cloth dampened in a solution of mild
detergent and water. Do not spray any liquid.
• Do not use chemicals or cleaners containing
harsh products such as benzene, toluene, xylene,
and acetone.
Operation
Environment • Location: Indoor, no direct sunlight, dust free,
almost non-conductive pollution (note below)
• Relative Humidity: < 80%
• Altitude: < 2000m
• Temperature: 0°C to 40°C
7