GW Instek PSM-Series Programming Manual - Manual (Page 23)

PSM SERIES PROGRAMMABLE POWER SUPPLY
PROGRAMMER MANUAL
⎯ 43 ⎯
Returns
Examples:
STATus:OPERation:CONDition? returns 0.
STATus:OPERation:ENABle
Function:
Set or query the enable mask that allows the masked conditions in the event
register to be reported in the summary bit. If a bit is 1 (true) in the enable
register and its associated event bit changes to 1 (true), the associated
summary bit will change to 1 (true). Even though this is a 16-bit register,
only 15 bits (bit 0 through bit 14) are used. Bit 15 always reads 0.
Syntax
STATus:OPERation:ENABle
STATus:OPERation:ENABle?
is an integer from 0 to 32767.
Returns
Examples
STATus:OPERation:ENABle 32767 sets all 15 bits of the register to 1.
If the STATus:OPERation:ENABle? returns 0, all 15 bits of the
register are 0.
STATus:OPERation?
Function:
Returns and clears the contents of the OPERation register.
PSM SERIES PROGRAMMABLE POWER SUPPLY
PROGRAMMER MANUAL
⎯ 44 ⎯
Syntax:
STATus:OPERation?
Returns:
Examples:
STATus:OPERation? returns 0.
STATus:PRESet
Function:
Set the OPERation and QUESTionable enable registers to zeros.
Syntax:
STATus:PRESet
STATus:QUEStionable:CONDition?
Function:
Return the contents of the QUEStionable register. Reading the condition
register is non-destructive.
Syntax:
STATus:QUEStionable:CONDition?
Returns:
Examples:
STATus:QUEStionable:CONDition? returns 0.