GW Instek PEL-300 - Manual (Page 18)

15
Examples:
ΠIn C.V. MODE, to set voltage at 10V, W SET at 300W, STEP at 1V and to save current data in the 99th batch.
STEP 1. C.V. MODE STEP 9. V.I.R. SET
STEP 2. V.I.R. SET STEP10. 1
STEP 3. 10 STEP11. ↵
STEP 4. ↵ STEP12. SHIFT
STEP 5. W SET STEP13. RCL V
STEP 6. 300 STEP14. 99
STEP 7. ↵ STEP15. ↵
STEP 8. SHIFT
ΠIn C.C. MODE, to set current at 1A, power at 300W, STEP at 0.2A, FREQ. at 1000Hz, DUTY at 50%. To work
in SW MODE, and save data in the 11th batch.
Note: In addition to setting the values of current, power and STEP, FREQ. SET, and DUTY SET should also be
set while proceeding the setting of C.C. MODE SW function.
STEP 1. C.C. MODE STEP12. FREQ. SET
STEP 2. V.I.R. SET STEP13. 1000
STEP 3. 1 STEP14.
↵
STEP 4. ↵ STEP15. DUTY SET
STEP 5. W SET STEP16. 50
STEP 6. 300 STEP17.
↵
STEP 7. ↵ STEP18. SW ON/OFF
STEP 8. SHIFT STEP19. SHIFT
STEP 9. V.I.R. SET STEP20. RCL V
STEP10. 0.2 STEP21. 11
STEP11. ↵
STEP22.
↵