AT&T TL86109 - Manual (Page 96)

90
Multiple handset use
Call transfer using intercom
NOTES:
To cancel the transfer and return to the external call before the intercom call is
answered, press
OFF/
CLEAR
, 1 LINE/
FLASH
or 2 LINE/
FLASH
on your handset.
If the destination handset or the telephone base does not answer the intercom call
within 100 seconds, or if the destination handset or the telephone base is in the
directory or call log, or is out of range, the calling handset shows
Unable to call. Try again and automatically returns to the external call.
From this intercom call, you have the following options:
You can transfer the call. Press the OPTION softkey and then the
SELECT softkey to choose Transfer on the calling handset, or put
the orginal handset in the charger. The original handset displays
Call transferred. The other handset or telephone base automatically
connects to the outside call.
You can let the other handset or the telephone base join you on the
outside call in a three-way conversation. Press the
OPTION softkey.
Press or to highlight Share call and then press the SELECT softkey.
You can end the intercom call and continue the outside call on the
original handset. Press the
END softkey on the destination handset or
put it in the charger, or press OFF/
CLEAR
on the original handset. The
destination handset displays Intercom ended.
Using the telephone base:
When on an outside call, press the OPTION softkey.
Press DIR, CID , /DELETE or /REC to highlight Intercom, then press
the SELECT softkey.
If you have only one cordless handset, the outside call is put on hold
and the telephone base displays
Calling handset. The
cordless handset rings and displays Base is calling.
If you have two or more cordless handsets, the
telephone base displays
INTERCOM TO:
Press DIR, CID , /DELETE or /REC to
choose a destination handset then press the
SELECT softkey.
-OR-
Press 1-9 for HANDSET 1-9, *0 for HANDSET 10,
*1 for HANDSET 11 or *2 for HANDSET 12, and then press the
SELECT softkey to initiate an intercom call.
The telephone base displays Calling handset X. The destination handset
rings and displays Base is calling.
•
•
4.
•
•
•
1.
2.
•
•
–
Intercom
Directory
Call log
SELECT
INTERCOM TO:
HANDSET 1
HANDSET 2
HANDSET 3
BACK SELECT