AT&T TL86109 - Manual (Page 77)

71
Telephone operation
Make, answer and end a call
Answer an incoming call on line 1 or line 2 while on a cell call
If you are on a cell call and you receive an incoming call on line 1 or
line 2, you hear a beep on the device you are using while the other devices
ring.
Line 1 Incoming call or Line 2 Incoming call displays on the handset
and telephone base.
To answer the incoming call on line 1 or line 2:
Using a cordless handset:
Press 1 LINE/
FLASH
or 2 LINE/
FLASH
on the handset for the ringing line.
The cell call is automatically placed on hold. The other cordless handsets
and telephone base display
CL) ON HOLD and either L1) IN USE or
L2) IN USE.
Using the telephone base:
Press 1 LINE or 2 LINE on the telephone base for the ringing line. The cell
call is automatically placed on hold. The cordless handset displays CL) ON
HOLD and either L1) IN USE or L2) IN USE.
To end a call on line 1 or line 2:
Using a cordless handset:
Press OFF/
CLEAR
on the handset. The cell line is still on hold. The other
handset(s) and telephone base display CL) ON HOLD.
Using the telephone base:
Press 1 LINE or 2 LINE on the telephone base for the corresponding line
or return the corded handset to the telephone base if you are using it . The
cell line is still on hold. The telephone base and handset display
CL) ON HOLD.
To resume the cell call on hold:
Using a cordless handset:
Press CELL on the handset.
Using the telephone base:
Press CELLULAR on the telephone base.
NOTE: If you have turned on your answering system and you do not answer the incoming
call on line 1 or line 2, the call is answered by your answering system.
•
•
•
•
•
•