Telephone base settings, Ringer volume – AT&T TL86109 User Manual

Page 47

Telephone settings

Telephone base settings

Ringer volume
You can select the ringer volume for incoming calls on line 1 or line 2 and
the cell line.

To adjust the telephone base ringer volume:

Press the

MENU softkey on the telephone base in idle

mode to enter the main menu.
Press

DIR, CID

/DELETE or /REC to highlight

Ringers, then press the SELECT softkey.
Press the

SELECT softkey to choose Ringer volume.

Press

DIR, CID

/DELETE or /REC to select

All lines, Line 1, Line 2, Cell A or Cell B, then press the
SELECT softkey to confirm.
Press

DIR, CID

/DELETE or /REC to adjust the

ringer volume. A sample of each ringer volume plays as
you scroll through the choices.

-OR-
Press the

OFF softkey to turn off the ringer. The telephone base displays

Ringer mute.

Press the

SET softkey to confirm. You hear a confirmation tone.

-OR-

Press

VOLUME

to set the ringer volume

while the telephone base is in idle mode to
set the ringer volume for all lines.
Press the

SET softkey to confirm and you hear

a confirmation tone.
-OR-
Press the

OFF softkey to silence the

ringer volume.

NOTES:

Changing the telephone base ringer volume does not affect the handset ringer volume.
For more information on handset ringer volume, see page 31.
When the ringer volume of line 1 or line 2 is set to off, the telephone base displays
Ringer off for the corresponding line. When the ringer volume of Cell A or Cell B is set
to off, the telephone base displays

Ringer A off or Ringer B off respectively. When the

ringer volume of all cell calls is set to off, the telephone base displays

Ringers off.

3.
4.

•

RINGERS

Ringer volume

Ringer tone

SELECT

RINGER VOLUME

All lines

Line 1
Line 2

SELECT

RINGER VOLUME

Phone memory

OFF SET