Fire-Lite IPDACT Installation Manual - Manual (Page 51)

IPDACT Module - Appendix
V-48
Doc.Dm373-I
Rev. 2.0
V - 3. Technical Specifications
Power Supply
NOMINAL VOLTAGE RANGE 10 V
DC
– 24 V
DC
MAX CURRENT 1 12V: Idle: 190 mA Alarm: 240 mA Transient 2 : 500mA
24 V: Idle: 100 mA Alarm: 120 mA Transient 2 : 300mA
Dimensions and weight
LENGTH x WIDTH x HEIGHT 140 x 92 x 29 mm
WEIGHT 150 gr
Environmental Specifications
OPERATING TEMPERATURE 0º to 49º C (32º to 120º F).
RELATIVE HUMIDITY Maximum: 93%
LAN Port
CONNECTOR RJ45 female
SPEED 10 Mbps
PROTOCOLS UDP, IP, ARP, DHCP, Telnet, Ethernet Blue Book
Other Characteristics
OUTPUT 2A max. if V ≤ 30 V
DC
for resistive loads
INPUT 1A max.
1 The IPDACT power consumption should be subtracted from the maximum power of the output delivered
by the control panel. A 750mA power source is recommended in all cases.
2 Transient lasting 75ms is produced when the control panel takes over the telephone line to call the control
center.