Fire-Lite IPDACT Installation Manual - Manual (Page 49)

IPDACT Module - Configuration
IV-46
Doc.Dm373-I
Rev. 2.0
IV - 5. Telnet
As previously mentioned, it is possible to access the IPDACT console through
a telnet client, from a PC or any other workstation. To do this, simply execute
the telnet client, indicating the IPDACT IP address. The interface for this said
console is identical to the one for the asynchronous console, so for further
information on this please see the section on this console.
The following figure shows an example of accessing through telnet from the
default client program in the Windows operating system.
Figure 27. Example of accessing through Telnet
Figure 28. Access Results