Fire-Lite IPDACT Installation Manual - Manual (Page 45)

IPDACT Module - Configuration
IV-42
Doc.Dm373-I
Rev. 2.0
IV - 4.3. IPDACT generic configuration
Configures data pertaining to the IPDACT which is not related to the
monitoring function and the sending of alarms. Data included here is the
IPDACT IP address, the access gateway to the Teldat VisorALARM, the
console access password, the events you wish to view, use of the check digit
in the telephone console, etc.
In the following figure, the default values are displayed. Press z to return to
the previous menu.
-- Generic MIP config --
IP Connectivity
a) DHCP client: OFF
b) IP addr: 192.168.0.100 msk: 255.255.255.0
c) Gateway IP: 192.168.0.200
User Access Control
d) Password: 24680
Miscellaneous
e) Date & time: 06/16/2003 12:41:25
f) Events: PHON
g) PC verifying digit: 0
z) Exit
option:
IV - 4.4. Monitoring configuration and sending of alarms
Configures everything relative to the IPDACT as a security element. Permits
you to configure the account number associated to the IPDACT, the Teldat
VisorALARM IP address and the UDP port used for communication, the
passwords used to encrypt the IPDACT messages (local password) and that
used to decrypt the Teldat VisorALARM messages (remote password), the
interval used to send the monitoring messages (keep-alive) and the number of
retries and the time between these in cases where the Teldat VisorALARM
does not acknowledge them. Lastly this also permits you to configure the
number of digits a telephone number has, the number of times an alarm is
sent to the Teldat VisorALARM until this can be sent over the telephone line.
The following figure displays the default values. Press z to return to the
previous menu.