beautypg.com

Aquametrix AM-TBR Turbidimeter User Manual User Manual

Page 28

background image

23

buttons. Press the ↵ button to accept it.
To avoid reading air and other anomalies, select the slowest speed (highest number). Select the
fastest response where monitoring of rapid changes is needed.







7.10. Displayed Resolution

The instrument is equipped with the ability to display several levels of resolution. The instrument
can display up to four digits to the right of the decimal place for turbidity readings below 10 NTU.
The default setting is 0.01 NTU. If the last digit or two is not stable, adjust the resolution to hide
these digits.








Change the resolution by pressing the or button. When the desired digit resolution has been
selected, press the ↵ button.

7.11. LCD Backlight Brightness

The LCD backlight brightness may need to be adjusted. This is of particular interest if multiple
instruments are located in the same area and it is desired for the entire group to have the same
appearance. Ten levels are available. The default brightness is 8.