Triton RL5000XP PC-BASED ATMS Installation Manual User Manual
Page 31

31
C
abINET
I
NsTaLLaTION
- C
HEMICaL
a
NCHORs
3. Remove the packing material
from inside of the box.
4. Remove the silver key from the
white plastic bag attached to the
ATM wrapping.
5. Stand the unit up and walk it out
of the shipping carton.
6. Remove the wrapping from the
ATM.
7. Use the silver-colored key to
unlock both the control panel and
the fascia door (which conceals
the locking mechanism) on the
front of the cabinet. Open the
fascia door.
8. Turn the handle on the locking
mechanism to open the front
enclosure door. If the door is
locked, see the sidebar on this
page for help in unlocking the
electronic lock.
9. Remove the packing material
from inside the bottom enclosure.
Next, remove the accessory kit;
open and inspect the contents.
Check the contents against the
enclosed packing list. Report
any missing parts to Triton
immediately.
UNLOCKING
ELECTRONIC
LOCKS
ELECTRONIC LOCK.
Upon arrival, the combination
of the lock should already
be preset to 1-2-3-4-5-6.
To unlock, enter the preset
combination and check for
proper operation. After each
keypress, the lock will beep.
After the final digit has been
entered, the lock will beep
twice and the open period
will begin. When a valid
combination has been entered,
the operator will
have approximately 3 seconds
to open the lock. To open the
lock, turn the dial clockwise.
After the lock is opened, the
door latch may be turned and
the safe opened.