Triton RL5000XP PC-BASED ATMS Installation Manual User Manual
Page 23
23
5. Stand the unit up and walk it out
of the shipping carton.
6. Remove the wrapping from the
ATM.
7. Use the silver key to unlock both
the control panel and the fascia
door (which conceals the locking
mechanism) on the front of the
cabinet. Open the fascia door.
8. Turn the handle on the locking
mechanism to open the front
enclosure door. If the door is
locked see the sidebar on this
page for help in unlocking the
electronic lock.
9. Remove the packing material
from inside the bottom enclosure.
Next, remove the accessory kit;
open and inspect the contents.
Check the contents against the
enclosed packing list. Report
any missing parts to Triton
immediately.
POWER OUTLET
ACCESSIBILITY
Whether you are installing a new
outlet or plan to use an existing
outlet to supply power to the ATM,
make sure the following require-
ments are met:
1. The outlet is located near the
cabinet.
2. The outlet is easily accessible.
3. Access to the outlet will not
be blocked once the cabinet
is installed!
C
abINET
I
NsTaLLaTION
- s
TaNDaRD
a
NCHORs
UNLOCKING
ELECTRONIC
LOCKS
ELECTRONIC LOCK.
Upon arrival, the combination
of the lock should already
be preset to 1-2-3-4-5-6.
To unlock, enter the preset
combination and check for
proper operation. After each
keypress, the lock will beep.
After the final digit has been
entered, the lock will beep
twice and the open period
will begin. When a valid
combination has been entered,
the operator will
have approximately 3 seconds
to open the lock. To open the
lock, turn the dial clockwise.
After the lock is opened, the
door latch may be turned and
the safe opened.