Triton RL5000XP PC-BASED ATMS Installation Manual - Manual (Page 3)

3
f
EDERaL
C
OMMUNICaTIONs
C
OMMIssION
(fCC) C
OMPLIaNCE
Statement of Compliance: This equipment complies with Part 68 of the FCC
rules. Located in the control area of the Automated Teller Machine (ATM)
is the product label. This label lists the FCC registration number and ringer
equivalence number of the unit. If requested, this information must be provided
to the telephone company. USCO/FIC Codes: When ordering service from the
telephone company for the RL5000 XP ATM, the following information should
be supplied:
Universal Service Order Code (USOC): RJ-11C
The Facility Interface Code (FIC): 02LS2
Plug and Jack: The plug and jack used to connect this equipment to premise wiring
and telephone network must comply with the applicable FCC Part 68 rules and
requirements adopted by ACTA. A compliant telephone cord and modular plug
is provided with this product. The telephone cord is designed to be connected
to a compatible modular jack that is also compliant.
Ringer Equivalent Number (REN): The REN is used to determine the number
of the devices that may be connected to a telephone line. Excessive RENs on a
telephone line may result in the devices not ringing in response to an incoming
call. In most but not all areas, the sum of the RENs should not exceed five (5). To
be certain of the number devices that may be connected to a line, as determined
by the local RENs, contact the local telephone company.
RL5000 XP I
NsTaLLaTION
G
UIDE
** CAUTION **
Changes or modifications not expressly approved by Triton
Systems could void the regulatory compliance approval
and the warranty. Use of this product in a manner other
than those described in this manual may result in personal
injury!
D
IsCLaIMER
The manufacturer of the Automated Teller Machine (ATM) product(s) described
herein makes no representations or warranties, either expressed or implied, by or
with respect to anything in this manual, and shall not be liable for any implied
warranties of fitness for a particular purpose or for any indirect, special, or
consequential damages. Information in this document is subject to change without
notice and does not represent a commitment on the part of the manufacturer.