Triton 97XX Series Operation Manual - Manual (Page 62)

TRITON SYSTEMS, INC. 5-7
O
PERATION
M
ANUAL
- M
ODEL
97XX-Series SECTION 5 - MANAGEMENT FUNCTIONS
9700-S ERIES 9705-S ERIES 9710-S ERIES 9750-S ERIES
CHANGE SCHEDULE
F ACTORY D EFAULT : N/A
A CCESS I NSTRUCTIONS :
1. Select CLOSE from the MANAGEMENT FUNCTION screen.
2. Select SCHEDULE CLOSE.
3. Select CHANGE SCHEDULE.
D
ESCRIPTION
:
This function is used to set the time, in hours and minutes, at which
the terminal will automatically initiate contact with the processor
and perform a close operation. The time is entered in the form
‘HH:MM:SS’ (hours, minutes, seconds). Do not enter the ‘:’ char-
acters separating the fields, just the fields themselves. Press
CLEAR to erase everything and start over. Press the BACKSPACE
key to back up and erase a single character. Press QUIT to es-
cape without doing anything. Press SET TIME to load the entered
time into the clock.
The Cash Dispenser will not let you enter an invalid number for
hours or minutes. The clock will properly handle the rollover to the
year 2000.
E
RROR
C
ONDITIONS
:
There are no error conditions directly associated with this function.