Triton 97XX Series Operation Manual - Manual (Page 176)

TRITON SYSTEMS, INC. 5-121
O
PERATION
M
ANUAL
- M
ODEL
97XX-Series SECTION 5 - MANAGEMENT FUNCTIONS
9700-S ERIES 9705-S ERIES 9710-S ERIES 9750-S ERIES
MODEM SETUP STRING
F ACTORY D EFAULT : MODEM-SPECIFIC
A CCESS I NSTRUCTIONS :
1. Select TERMINAL CONFIGURATION from the MANAGEMENT
FUNCTIONS menu.
2. Select SET TERMINAL PARAMETERS.
3. Select TELEPHONE.
4. Select the MODEM SETUP option.
5. Select MODEM SETUP STRING.
D
ESCRIPTION
:
If special circumstances require a nonstandard modem con-
figuration, a Hayes-compatible setup string can be sent to the
modem when it is initialized. A custom modem initialization string
can be entered for the following options:
1. INITIALIZE STRING
2. PRE-HOST STRING
3. POST-HOST STRING
4. TRITON CONNECT STRING
When an option is selected, the current modem string for that func-
tion is displayed (if nothing appears on the screen, no string has
been entered). Select CHANGE to blank the current entry, and
then enter the desired modem string. When done, press OK to
accept the entry.
E RROR C ONDITIONS :
Setting this value incorrectly can cause communication failure in
the applicable area, due to improper modem setup. Consult Triton’s
Technical Service Department before changing this parameter.