Triton 97XX Series Operation Manual - Manual (Page 183)

TRITON SYSTEMS, INC.
SECTION 5 - MANAGEMENT FUNCTIONS O
PERATION
M
ANUAL
- M
ODEL
97XX-Series
5-128
9700-S ERIES 9705-S ERIES 9710-S ERIES 9750-S ERIES
BACKUP NUMBER
F ACTORY D EFAULT : NONE
A CCESS I NSTRUCTIONS :
1. Select TERMINAL CONFIGURATION from the MANAGEMENT
FUNCTIONS menu.
2. Select SET TERMINAL PARAMETERS.
3. Select MORE.
4. Select TRITON CONNECT.
5. Choose BACKUP NUMBER.
D
ESCRIPTION
:
The BACKUP NUMBER function is used to enter a backup num-
ber that the terminal can use for calling back the Triton Connect
computer.
When this function is selected, the current phone number is dis-
played (if nothing appears on the screen, no number is set). Se-
lect CHANGE to blank the current entry, and then enter the de-
sired phone number. The phone number may be up to 15 digits
long. It can also contain a dialing prefix, such as a ‘9’ for an out-
side line, if necessary. If you need to pause after the prefix, place
a comma in the number for a two-second delay at that point. Press
the key, then the <0> key, followed by the ROW> key to select the comma character. Make sure to enter the
long distance prefix ‘1’ if you are dialing an 800 number or a toll
long distance number. Do not enter dashes in the number.
E RROR C ONDITIONS :
There are no error conditions directly associated with this function.