Triton 97XX Series Operation Manual - Manual (Page 48)

TRITON SYSTEMS, INC. 4-13
O
PERATION
M
ANUAL
- M
ODEL
97XX-Series SECTION 4 - CURRENCY HANDLING
• Slanting pile
To avoid dispensing problems caused by a
“slanting” pile, put the notes in neat bundles of no
more than ½ to ¾ inches in thickness (100-200
notes). Turn every other bundle around to
minimize slanting of the pile (bundle should have
the same height on both sides, if possible).
• Cupped bundle
To avoid dispensing problems caused by cupped
bundles, turn all the bundles with the cupped side
towards the dispense opening of the note tray
(opposite end from the handle).
Alternate slanted
bundles.
Turn cupped sides
toward dispense
opening.
• Mixed (Slanting and Cupped) bundles
Separate the mixed currency into neat bundles of
100-200 notes of each type. Place the cupped
bundles nearest the dispense opening of the tray,
with the cupped side facing the opening. Turn
every other slanted bundle around to give the
bundles the same height on both sides and place
after the cupped bundles.
• Old and New Notes
Always place the bundles containing old notes into
the cassette first (nearest the handle) and bundles
containing new notes last (nearest the dispense
opening).
• Common notes
Simply place the prepared bundles in the tray.
3. Make sure the note pile is as even as possible. If
necessary, use your hands to smooth and level
the pile.
Compensating for various note
conditions.
Place old notes
together.