Reinstalling the dispenser mechanism, Reinstalling the dispenser mechanism -11, Warning – Triton 97XX Series Operation Manual User Manual
Page 46
TRITON SYSTEMS, INC.
4-11
O
PERATION
M
ANUAL
- M
ODEL
97XX-Series
SECTION 4 - CURRENCY HANDLING
3.
Remove any notes in the reject compartment.
4.
Close and lock the reject tray. Remove the key.
Slide the cassette back into its compartment in
the dispensing mechanism. Make sure the reject
cassette is fully inserted! You will feel the cas-
sette snap securely into the catches.
You may wish to record the denomination and num-
ber of notes removed from the reject tray, for use when
balancing the note tray against the cassette/day close
records.
Reinstalling the Dispenser
Mechanism
1.
After reinstalling the currency and reject cassettes,
pull down on the swivel platform locking pin to
allow the swivel platform to turn.
Rotate the mechanism back to the operating po-
sition.
Mechanism in operating position. If unit is slide-mounted,
release locking tab and slide dispenser into cabinet.
Slide rail locking tab.
**WARNING**
DO NOT RECYCLE REJECTED NOTES INTO
A CASSETTE! Doing so could cause more
rejects and/or currency jams.
If the mechanism uses a slide-rail mounting sys-
tem, press in on the slide rail locking tab as you
slide the mechanism back into the cabinet.
2.
Close and lock the security cabinet.