Triton 97XX Series Operation Manual - Manual (Page 43)

O
PERATION
M
ANUAL
- M
ODEL
97XX-Series
4-8
SECTION 4 - CURRENCY HANDLING
TRITON SYSTEMS, INC.
Turn mounting platform to access position.
5. To remove the note cassette, grasp the cassette
handle and pull in a firm but controlled manner to
release the cassette from the snap catches. Try
to use only the minimum amount of force to
release the cassette! The cassette will only move
a few inches! Once released from the snaps you
can slide the cassette out of the mechanism. Place
the cassette on a level, flat surface for servicing.
Removing note cassette.
Note cassette removed from dispenser.
Loading the Currency Cassette
1. Unlock the cassette and open the cassette lid
using the supplied key. Move the pusher plate to
the rear of the cassette (toward the handle).
Note: The pusher plate action will depend on the
type of cassette in use. Some cassettes require
you to maintain pressure on the pusher plate as
needed while loading notes. Other cassettes use
a locking mechanism to hold the packer plate in
the loading position. On these cassettes, pull the
pusher-plate all the way back to the handle end
of the cassette and turn the key to latch the pusher
plate into the loading position.
Open the note cassette lid.
Unlock note cassette.