Triton 97XX Series Operation Manual - Manual (Page 153)

TRITON SYSTEMS, INC.
SECTION 5 - MANAGEMENT FUNCTIONS O
PERATION
M
ANUAL
- M
ODEL
97XX-Series
5-98
9700-S ERIES 9705-S ERIES
9710-S ERIES 9750-S ERIES
SECONDARY DESCRIPTION
F ACTORY D EFAULT : ‘NONE
A CCESS I NSTRUCTIONS :
1. Select TERMINAL CONFIGURATION from the MANAGEMENT
FUNCTIONS menu.
2. Select SET TERMINAL PARAMETERS.
3. Select CASSETTE SETUP.
4. Choose the CASSETTE PARAMETERS option.
5. Choose a cassette (A, B, C, or D).
6. Select the DESCRIPTION option.
7. Choose the SECONDARY DESCRIPTION option.
D ESCRIPTION :
The SECONDARY DESCRIPTION provides a location for other
information of general interest or information required by law.
To enter a number, press the key that has that number. To enter a
letter, first press the CTRL key, then press the key that has the
letter you want. The first press of the key will display the first char-
acter above the number. Subsequent presses will display the other
characters in sequence. When the character you want is displayed,
press the key ‘to lock’ in the letter. If the next
character is a letter, the CTRL key must again be pressed first.
The description of a NON-CASH item may contain up to 28 alpha-
numeric characters.