LumaSense Technologies 3434i SF6 Leak Detector - Manual (Page 65)

Chapter 5
______________________________________________________________________
_____________________________________________________________________________
BE6028-14 3434i SF6 Leak Detector LumaSense Technologies A/S
Page 65 of 191
The current date is entered as Year-Month-Day for example the
24 th of July 2014 is entered as 2014-07-24.
The current time is entered as the time on the 24-hour clock for
example 14:05 is five minutes after two in the afternoon. Table
5.2 details the range of acceptable values and the default value of
the date and time.
Table 5.2 The range of acceptable values and the default value of
the date and time
Display Text Acceptable Values Default
Value
ENTER CURRENT DATE 0000-01-01 0000-01-01 to 9999-12-31 2013-01-01
ENTER CURRENT TIME 12:47 00:00 to 23:59 12:00
If the Monitor is to be used as a stand-alone instrument, then the
clock can be adjusted to your local time using the following
instructions.
1. Press SET-UP.
Refer to the Set-Up Tree diagram, so that you can follow your
progress through the various branches of this set-up.
2. Press S3 S1 S1 S1.
The following screen picture appears:
3. To change the date, press ¿ .
4. Use the direction push-buttons to enter the correct date. If you
make a mistake, press S1 to revert back to the original date.
5. Press
¿ to accept the date.
This causes the text on the display screen to change to the
following:
CURRENT DATE 2014 – 06 – 13
PRESS ENTER TO CHANGE VALUE