LumaSense Technologies 3434i SF6 Leak Detector - Manual (Page 113)

Chapter 9
______________________________________________________________________
_____________________________________________________________________________
BE6028-14 3434i SF6 Leak Detector LumaSense Technologies A/S
Page 113 of 191
9.3.2 Recalling Data from Background Memory
To recall data stored in Background Memory to Display Memory:
1. Press Memory S2.
2. Use the direction keys to select the correct location number. The
following text is displayed.
3. If you want to continue, press S1, and the following text is
displayed.
If you want to Stop, press S3, this returns you to the original
display showing SELECT MEMORY FUNCTION so that you can
STORE any data which is stored in Display Memory as explained
in section 9.3.1 .
4. Press S2. If data has not been stored in the chosen location, a
message will appear on the Monitor’s display to inform the user.
Otherwise, the data from the chosen location in Background
Memory will be copied into Display Memory.
5. Press MEMORY to exit.
LOCATION NUMBER 1
PRESS ENTER TO CHANGE VALUE
WARNING : DISPLAY MEMORY WILL BE DELETED
PROCEED STOP
LOCATION NUMBER 1 RECALLED
ACCEPT